欢迎访问:山东燊赫通风设备有限公司!
一键分享网站到:
服务热线
0531--68856675
网站首页
公司简介
荣誉资质
新闻中心
产品中心
工程案例
留言反馈
联系我们

新闻中心

当前位置: 首页-新闻中心 > 山东通风管道加工需要注意的重点问题

山东通风管道加工需要注意的重点问题

发布时间:2017/07/04

  不同管道合理有序安装是保证整个工程作业正常完成的基础,所以在设计时就一定要协调好,同时要保证通风管道的质量要过硬,工程结束再去维修会非常的麻烦。

  Different pipe installation is reasonable and orderly basis to ensure the normal operation of the entire project completed, so when the design must be coordinated at the same time, to ensure the quality of ventilation pipe to be perfect, go to the end of the project will be very troublesome maintenance.

  近几年来通风管道发展迅速,很多行业都需要不同类型的的通风管道。对于通风管道而言一般来说除了要求其质量的同时,在安装过程中也要注意几点,这样才能最大化的利用好通风管道,也能降低风险,提高生产的安全性。

  In recent years, ventilation ducts have developed rapidly, and many industries require different types of ventilation ducts. The ventilation pipeline in general in addition to the requirements of its quality at the same time, during the installation process should pay attention to several points, good ventilation pipe so as to maximize the utilization, can also reduce the risk, improve the production safety.

  那么通风管道安装需要注意哪几个方面呢?

  So, what are some aspects of ventilation pipe installation?

  1、施工前总工程师应将各工种的管线几种画在一张平面图上,并用不同彩色笔标记。在各交点处综合标高,检查是否有否有矛盾之处,及时发现并解决。
济南排烟罩价格

  1. Before construction, the chief engineer shall draw several lines of each type of work on a plan and mark them with different colored pens. The comprehensive elevation at each intersection shall be checked to see if there are any inconsistencies and timely detection and settlement.

  2、为了减少投资,节省空间,降低层高,有些铺设无坡度要求的管道。

  2, in order to reduce investment, save space, reduce height, and some laying no slope requirements of the pipeline.

  3、在建筑设计中,不同的工种要协调好空间的分隔,给水排水等,要提前核算好每种管道的标高范围,在施工的时候不要超过这个界限。

  3, in the architectural design, different types of work to coordinate the space division, water supply and drainage, etc., to advance the calculation of each kind of pipe elevation range, in construction, do not exceed this limit.

  4、如果管道之间遇到相碰的情况,那么要遵循小管让大管,有压让无压。

  4, if the situation encountered between pipeline collision, then follow the tubular pressure to let the bassoon, no pressure.

  本文的精彩内容来自山东通风管道加工详细内容请点击我们的官方网站:http://www.jnqsg.com/谢谢您的到来!

  The highlights of this article are from the Shandong ventilation pipe processing details, please click on our official website: http://www.jnqsg.com/, thank you for coming!

网站首页 公司简介 荣誉资质 新闻中心 产品中心 工程案例 留言反馈 联系我们
contact us联系我们
地址:济南市天桥区
电话:0531--68856675
QR code关注我们
二维码拿出手机扫一扫

本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!

立即咨询 立即咨询 立即咨询