欢迎访问:山东燊赫通风设备有限公司!
一键分享网站到:
服务热线
0531--68856675
网站首页
公司简介
荣誉资质
新闻中心
产品中心
工程案例
留言反馈
联系我们

新闻中心

当前位置: 首页-新闻中心 > 铝合金风口和可开格栅风口的区别

铝合金风口和可开格栅风口的区别

发布时间:2017/09/13

  一、山东通风管道加工可开格栅风口的详细描述

  First, the Shandong ventilation pipe processing can be opened grille detailed description of the tuyere

  1、叶片可垂直长边或平行长边,订货时必须注明,无注明时,一律按叶片平长边进行生产。

  1, the blade can be vertical long side or parallel long edge, order must be noted, when no indication, all according to the blade flat long edge production.

  2、该风口是GS型固定格栅风口的派生产品,在GS型的基础上增加一个可开的内框,使叶片部分为一活动门结构,拨动活动门的门闩即可将活动门打开,便于安装和维修。

  2, the air is the derivative product of GS type fixed air grille, increased with an open frame on the basis of GS type, the blade part is a movable door structure, a movable door latch can be movable door open, easy installation and maintenance.

  3、风口边框有宽窄之分,示意图中括号内尺寸为宽边框的尺寸,用户订货时必须注明,无注明时,一律按窄边框生产。

  3. The width of the air outlet is divided into the width and the width of the brackets in the drawing. The size of the width of the bracket should be indicated when the user orders.
山东通风管道加工哪家好

  二、铝合金风口安置前需注意的地方

  Two, aluminum alloy tuyere before installation should pay attention to

  安置前,应对铝合金风口各部件举行全面查抄。机件是否完备,叶轮与机壳的旋转偏向是否划一,各部联接是否精密,叶轮、主轴、轴承等紧张机件有无损伤,传动组是否机动等等。

  Before installing, answer all parts of aluminium alloy tuyere to be checked completely. Whether the mechanical parts are complete, whether the rotation of the impeller and the shell is uniform, whether the parts are connected accurately, whether the impeller, the main shaft, the bearing and other tight parts are damaged, whether the drive group is flexible and so on.

  如发明问题,应立刻予以修好和调解。过细主轴三角带轮和点击三角带轮想对应的槽位不行以堕落,套好胶布之后安置宁静防护罩,包管宁静。

  If problems are invented, they should be repaired and settled immediately. Not too small slot spindle triangular belt wheel and click on the triangle belt wheel corresponding to a tape placement after the fall, the quiet guard, ensure peace.

  别的我们还必要在安置铝合金风口的调治门的时间,肯定要过细不要装错,从而包管进气的时间与叶轮旋转偏向是一样的。

  We also need to place other Aluminum Alloy air regulating gate time must be careful not to install the wrong time, and the rotation of the impeller inlet to ensure that bias is the same.

  做好上面事变以后我们还应该过细:安置铝合金风口完毕之后,测试传动组是否正常,确定不会出现过紧和牢固部门出现碰撞等问题,发明问题及时调解到最佳状态即可。

  Do the above after the incident, we should also carefully: after placement of Aluminum Alloy tuyere is completed, test drive is normal, does not appear to determine the collision problem of tight and strong departments, identify problems and timely mediation to the best you can.

  本文的精彩内容来自山东通风管道加工详细内容请点击我们的官方网站:http://www.jnqsg.com/谢谢您的到来!

  The highlights of this article are from the Shandong ventilation pipe processing details, please click on our official website: http://www.jnqsg.com/, thank you for coming!

网站首页 公司简介 荣誉资质 新闻中心 产品中心 工程案例 留言反馈 联系我们
contact us联系我们
地址:济南市天桥区
电话:0531--68856675
QR code关注我们
二维码拿出手机扫一扫

本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!

立即咨询 立即咨询 立即咨询