您好,欢迎访问山东燊赫通风设备有限公司网站!

服务热线

13210558111

薄壁圆通风管采用密封胶嵌缝的要求

来源:http://www.jnqsg.com/     发布时间:2017-09-29  

  薄壁圆通风管制作质量的验收,按设计图纸与本规范的规定执行。山东通风管道加工工程中所选用的外购薄壁圆通风管,还必须提供相应的产品合格证明文件或进行强度和严密性的验证,符合要求的方可使用。

  The acceptance of the quality of the thin-wall flexible air duct is carried out according to the design drawings and this specification. The purchased thin walled flexible wind pipe in the project must also provide the relevant product qualification documents or the verification of the strength and tightness, which can be used in accordance with the requirements.

  1、适用于建筑工程通风与空调工程中,使用的金属、非金属薄壁圆通风管与复合材料薄壁圆通风管或风道的加工、制作质量的检验与验收。

  1. It is suitable for the inspection and acceptance of the processing and making quality of metal and nonmetal thin-wall wind pipes and composite thin-wall wind pipes or air ducts used in ventilation and air conditioning works of construction projects.

  2、薄壁圆通风管的密封应以板材连接的密封为主,可采用密封胶嵌缝和其他方法密封。密封胶性能应符合使用环境的要求,密封面宜设在薄壁圆通风管的正压侧。

  2, thin wall sealed air pipe should be flexible plate connection seal, the sealing sealant and other methods. Sealant performance should comply with the requirements of the use of the environment, the sealing surface should be located in the thin-walled pressurized air duct on the positive side.
山东通风管道加工公司

  3、对薄壁圆通风管制作质量的验收,应按其材料、系统类别和使用场所的不同分别进行,主要包括薄壁圆通风管的材质、规格、强度、严密性与成品外观质量等项内容。

  3, the thin air pipe production quality acceptance tact, should be carried out respectively according to their materials and Systems category and the use of the different places, mainly including thin walled tube material, flexible wind specifications, strength, tightness and product quality etc..

  4、镀锌钢板及各类含有复合保护层的钢板,应采用咬口连接或铆接,不得采用影响其保护层防腐性能的焊接连接方法。

  4 、 galvanized steel sheet and all kinds of steel plate with compound protective layer shall be made of bite joint or riveted joint, and the welding connection method that does not affect the anticorrosion performance of protective layer shall be adopted.

  5、 薄壁圆通风管道内外壁光滑,风道阻力小,送排风时不产生二次噪声,降低能耗,节约运行费用。

  5, thin flexible wind pipe, internal and external wall smooth, air duct resistance is small, send and exhaust air does not produce two times noise, reduce energy consumption, save operation cost.

  6、薄壁圆通风管的密封,应以板材连接的密封为主,可采用密封胶嵌缝和其他方法密封。密封胶性能应符合使用环境的要求,密封面宜设在薄壁圆通风管的正压侧。

  Seal 6, thin tact duct, should be connected with plate sealing, the sealing sealant and other methods. Sealant performance should comply with the requirements of the use of the environment, the sealing surface should be located in the thin-walled pressurized air duct on the positive side.

  本文的精彩内容来自山东通风管道加工详细内容请点击我们的网站:http://www.jnqsg.com/谢谢您的到来!

  The highlights of this article are from the Shandong ventilation pipe processing details, please click on our official website: http://www.jnqsg.com/, thank you for coming!

上一篇:螺旋式风管单元强度大于通俗风管
下一篇:新风机组是和风机盘管配合使用的特点