在济南通风管道的加工过程中，要注意材料的选择是否合适。针对不同的功能需求，需要选择不同的材料，采用不同的加工工艺。下面，就和大家一起来看看，济南通风管道的材料选择，希望可以给大家带来帮助。
In the process of ventilation pipes in Ji'nan, we should first pay attention to the suitability of materials. For different functional requirements, we need to choose different materials and adopt different processing techniques. Next, let's take a look at the material selection of Jinan ventilation pipeline. I hope it can help you.
1.对于薄钢板通风管道内、外表层和内部绝热材料在通风管道加工中粘接牢固，这是是保证复合材料的基本条件之一。按照规定面积和厚度不仅能延长风管的使用寿命还能增加保温效果，让风管得到大程度和好的利用。在这里薄钢板的选择也尤为重要。
1. It is one of the basic conditions to ensure the safety of composite materials that the insulation materials inside, outside and inside the ventilation pipes of thin steel plates are firmly bonded in the processing of ventilation pipes. According to the prescribed area and thickness, not only can the service life of the duct be prolonged, but also the insulation effect can be increased, so that the duct can be used to the maximum extent and the best. The choice of thin steel sheets is also very important here.
2.选择好的通风管道材料，在通风管道加工过程中，要注意风管的表面是铝箔材质，为了确保表面层不易损坏，因此要对铝箔材质作出规定，并且为了保证也规定了风管表层的铝箔厚度。
2. Choose good ventilation duct material, in the process of ventilation duct processing, we should pay attention to the surface of the duct is aluminum foil material, in order to ensure that the surface layer is not easy to damage, so we should make provisions for the aluminum foil material, and in order to ensure safety, we also stipulate the thickness of the aluminum foil on the surface of the duct.
通风设备 、通风工程的质量更是决定了家庭和公共场所的环境质量的优劣，人们在装修中更加注重通风设备的质量问题。南京通风工程有限公司通风产品和服务在客户中拥有良好口碑，以产品的质量和信誉占领市场。
The quality of ventilation equipment and ventilation engineering determines the environmental quality of family and public places. People pay more attention to the quality of ventilation equipment in decoration. The ventilation products and services of Nanjing Ventilation Engineering Co., Ltd. have a good reputation among customers, and occupy the market with the quality and reputation of products.
(1)当风管与风机衔接时，应在进出风口处加软接头，其软接头的断面尺度应与风机进出风口共同。软管接头普通可采用帆布、人造革等材料，软管长度不宜小于200，松紧度应适宜，柔性软管可缓冲风机的振荡。
(1) When the duct is connected with the fan, a soft joint should be added at the inlet and outlet of the fan. The cross-sectional dimension of the soft joint should be the same as that of the inlet and outlet of the fan. The hose joint can be made of canvas, artificial leather, etc. The length of hose should not be less than 200, the tightness should be appropriate, and the flexible hose can cushion the vibration of the fan.
(2)当风道与除尘设备、加热设备等衔接前，应待设备装置终了后，按理论测绘的图纸中止预制和装置。
(2) When the air duct is connected with dust removal equipment and heating equipment, the prefabrication and equipment shall be discontinued according to the theoretical drawing after the equipment is finished.
(3)济南通风管道装置时，进、出风日宜在风道预制时开出洞口，如需在装置终了的风道上现开风口，其接口处应紧密。
(3) When Jinan ventilation pipeline is installed, the inlet and outlet days should be opened when the duct is prefabricated. If the outlet is to be found in the duct at the end of the installation, the interface should be close.
(4)当运送含凝结水或含湿量较大的气体时，其水平管道宜设有坡度，并在低点处接排水管。装置时风道底部不宜呈现纵向接缝，对底部有接缝处应中止密封处置。
(4) When transporting gas with condensate water or high moisture content, its horizontal pipeline should be equipped with gradient and connected with drainage pipe at low point. The longitudinal joint is not suitable for the bottom of the duct, and the sealing treatment should be stopped for the joints at the bottom.
(5)对运送易燃、易爆气体的钢板风道，在风道衔接法兰处应装置跨接线，并与静电接地网衔接。
(5) For steel plate air ducts transporting flammable and explosive gases, a cross connection shall be installed at the flange of the connection of the air ducts and connected with the electrostatic grounding grid.
(6)当水平风道高度在4m以上时，装置人员应系带。脚手架或移动式支架上的跳板应固定好，跳板宽度应契合规范，在脚手架上的装置人员宜携东西袋，避免东西或电钻等物掉落伤人。
(6) when the height of the horizontal airway is above 4m, the installation personnel should fasten the seat belt. The springboards on scaffolds or mobile supports should be fixed well, the width of the springboards should conform to safety specifications, and the installers on scaffolds should carry bags to avoid falling things or electric drills to injure people.
(7)双吊杆支架在风道就位后，应保证横担平直，吊杆不改动，双吊杆受力均匀。
(7) After the double suspender bracket is in place in the airway, it should ensure that the cross-arm is straight, the suspender is unchanged, and the double suspender bears uniform force.
通风管道好是三个月进行一次清洁，这样既可以保证平时正常的运转，还可以延长通风管道的使用寿命。
Ventilation pipes should be thoroughly cleaned once every three months, which can not only ensure normal operation at ordinary times, but also prolong the service life of ventilation pipes.
These are the key factors affecting the quality of ventilation pipes introduced by Jinan Ventilation Pipeline Manufacturer. If you want to know about the installation of ventilation pipes, please pay attention to our official website: http://www.jnqsg.com/. We will serve you wholeheartedly and look forward to your visit!
上一篇：不锈钢螺旋管的有哪些特点？
下一篇：通风系统不同的分类有不同的称号
