对于不同种类的上的清洗维护，，也就是镀锌薄钢板风管，它其实也就是需要直接的就动用比较的风管清洗技术，就目前来讲的话，在今年的时候，对于
通风管道的清洗，其实也就是会直接的就流行的是清洗机器人，就它的耗资很大，周期上也比较长。
For different types of cleaning and maintenance, first of all, galvanized sheet steel air duct, which in fact requires the use of relatively advanced air duct cleaning technology directly. At present, in this year's time, for the cleaning of ventilation duct, in fact, the cleaning robot will be directly popular, which costs a lot and has a long cycle.
通风管道在很多工厂、学校等公共场所使用，主要是为了通风换气，而在工厂中使用的通风管道不但要通风，而且还要保证车间的温度恒定，一般车间温度保持在25摄氏度，这是加工的需要，任何物质都有热胀冷缩的作用，除水以外，所以在热处理车间更是对温度有严格的要求。
Ventilation pipes are used in many factories, schools and other public places, mainly for ventilation and air exchange. The ventilation pipes used in factories should not only ventilate, but also keep the temperature of the workshop constant. Generally, the temperature of the workshop should be kept at 25 ℃, which is the need of processing. Any substance has the function of heat expansion and cold contraction. In addition to water, so in the heat treatment workshop, the temperature is more important There are strict requirements.
在热处理车间安装通风管道需要按照，车间安装工艺图纸进行安装，然后根据实际需要进行调整，如果还不能保持室内温度稳定，需要对车间温度安装调整器，一般的车间会以空调代替，所以我们也要为空调加装通风设备，这些安装的通风系统都是必不可少的。
The installation of ventilation pipes in the heat treatment workshop needs to be carried out according to the workshop installation process drawing, and then adjusted according to the actual needs. If the indoor temperature cannot be kept stable, the temperature regulator in the workshop needs to be installed, and the general workshop will be replaced by air conditioner, so we also need to install ventilation equipment for the air conditioner, and these installed ventilation systems are essential.
应该保持内壁是光滑的，而且通风管道加工的过程中，还不能将涂层损坏，若是出现损坏的部位，需要用环氧树脂涂刷在表面即可。另外还要做好防腐蚀措施，不能使用抽芯铆钉，而且在通风管道零件装配的时候，这些零件都要经过镀锌处理才行。
The inner wall should be kept smooth, and the coating cannot be damaged during the processing of the ventilation pipe. If there is any damaged part, it needs to be painted on the surface with epoxy resin. In addition, anti-corrosion measures shall be taken, and blind rivets shall not be used, and these parts shall be galvanized during the assembly of ventilation pipe parts.
不同种类的通风管道本身的施工安装其实也就是需要我们进行注意，就镀锌薄钢板风管，接下来讲的话，对于它的制作以及其安装周期上也比较长，关于这一点，我们其实也就是会注意到对于管道尺寸以及其走向变更的时候会比较的费工费事。
In fact, the construction and installation of different types of ventilation pipes need our attention. As for galvanized sheet steel air pipes, the next thing we will talk about is that the production and installation cycle of them are also relatively long. As for this, we will notice that the pipe size and its direction change will be more labor-intensive.
关于上述通风管道的安装，对于其保温层在风管安装好之后其实也就是要进行现场安装，在工序上比较的繁琐。
As for the installation of the above ventilation pipes, the insulation layer is actually to be installed on site after the installation of the air pipes, which is quite tedious in the process.
接下来，就是通风管道当中关于无机玻璃钢风管的安装，对于这类的管道本身其实也就是会比较的笨重，不容易进行搬运，再者，就另外一个方面来讲，我们其实也就是会注意到它本身的强度上其实也就是会比较高，但是这类的通风管道本身而言也就是会比较脆弱，容易受到碰撞导致其出现酥裂与破损。
Next, it is about the installation of inorganic FRP air ducts in the ventilation ducts. For this kind of ducts, they are actually bulky and not easy to carry. Moreover, on the other hand, we will notice that their strength is actually relatively high, but this kind of ventilation ducts are relatively fragile It is easy to crack and damage due to collision.
上一篇：排烟罩的清理方法，你一定要记牢！
下一篇：通风管道对于我们生活起到什么样作用？
