一、处理网清洗：
First, processing network cleaning:
1、切断电源，打开检修门。
1, cut off the power supply, open the door.
2、将预处理网拉出。
2. Pull out the pretreatment net.
3、放入清洗槽中浸泡十分钟，轻轻将网上油污清洗干净，并用清水彻底冲洗干净。
3, put into the sink for ten minutes, gently clean the oil on the net, and rinse thoroughly with clean water.
4、将干燥的预处理网按原位置放回静电式油烟净化器。
4. The drying pretreatment net is put back to the electrostatic fume purifier according to the original position.
二、电场清理:
Two. Electric field cleaning:
1、切断电源，打开检修门，取出电场。
1, cut off the power supply, open the door and take out the electric field.
2、用清洁片（塑料片）放在电极板中间，贴着电极板由上向下移动，只需将电极板上大部分油污清理掉即可，一次清理不干净，可以多次清理。
2. Clean the pieces (plastic pieces) in the middle of the electrode board, stick to the electrode board, move up and down, just clean most of the oil on the electrode board. Once cleaning is not clean, it can be cleaned several times.
3、清理干净刮下的油污，用清水洗干净。
3, clean up the scraping oil, wash with clean water.
4、清洗过的电场自然风干（如仍有少量油污，不会影响产品净化效果）。
4, the electric field cleaned naturally dry (if there is still a small amount of oil pollution, will not affect the product purification effect).
5、将干燥的电场按原位置放回净化器，关上检修门便可以重新工作。
5. Put the dry electric field back to the purifier in the original position and turn off the door before you can work again.
客户的满意就是对我们的肯定，欢迎您前来选购我公司的产品，我们一直以为您提供产品为己任并一直坚持这样做。欢迎您的光临。
Customer satisfaction is our affirmation, you are welcome to come to buy our products, we have always thought you provide products as their own responsibility, and has always insisted on doing so. Welcome to our company.
上一篇：厨房空调通风系统采用形式
下一篇：如何快速清洗排烟罩
