如此的话无妨使设备的运用周期升高，洗刷简洁简略，有利于作业的敏捷进行，重要的一点便是设备的风量，转速，等技艺参数需求抵达悉数工程的运用要讲和规章。
In this way, it will increase the use cycle of the equipment, and the cleaning is simple and simple, which is conducive to the rapid operation. The important point is that the technical parameters such as the air volume, rotation speed, and so on of the equipment reach the requirements of all engineering applications and regulations.
假设条件略微好一点仓库无妨挑选设备通风管道，不只无妨处理问题，还能改进仓库环境，更利于物质的贮存。也无妨挑选设备换气扇或许设备通风电风机，但需注重，通风口装的风机在下班的时辰关掉，假设光转动，转轴过热起火会导致火灾，构成仓库严峻事件。
Assume that the warehouse with slightly better conditions is not only conducive to selecting equipment ventilation pipes, but also to improving the warehouse environment and material storage. It is also no harm to select the equipment ventilator or the equipment ventilation electric fan, but it should be noted that the ventilator installed at the vent is turned off at the time of work. Assuming that the light rotates, the shaft overheats and catches fire, which will lead to a serious event in the warehouse.
常用的塑料通风管道是用硬聚氯乙烯塑料板加工而成。因为它具有较好的化学安稳性，常用来运送有侵蚀性的气体。硬聚氯乙烯风管及附件进行加工时，与金属板风管在翻开划线方面是相同的，其余方面有很大的差异。通风管道设备结束往后，板与板的联接选用热风塑料焊接，风管的纵缝应交锗配备，圆形风管可在组配焊接时研究。
The commonly used plastic ventilation pipe is made of rigid polyvinyl chloride plastic sheet. Because of its good chemical stability, it is often used to transport corrosive gases. Unplasticized polyvinyl chloride air duct and accessories are processed in the same way as metal sheet air duct in terms of opening and scribing, while there are great differences in other aspects. After the completion of the ventilation duct equipment, the connection between the plate and the plate shall be welded with hot-air plastic. The longitudinal seam of the air duct shall be equipped with germanium. The round air duct can be studied during assembly and welding.
通风管道工程平常选用手艺施工，不需求特意的加工设备，因此通风管道工程适宜于家用空调如此的小场所施工。选用复合伙料现场制造巨细通、弯头号配件也非常简略，因此施工速度快，且对施工职员的需求也相对下落。
The ventilation duct works are usually constructed by craft, and do not require special processing equipment. Therefore, the ventilation duct works are suitable for construction in such small places as domestic air conditioners. It is also very simple to use composite materials to manufacture large and small fittings and elbow fittings on site, so the construction speed is fast, and the demand for construction staff is relatively low.
其他，通风管道对设备精度的需求也相对较低，这又能够前进风管的设备速度。通风管道工程界说无妨阐明为：送风、排风、除尘、气力运送和防、排烟体系工程的总称。
In addition, the demand for equipment accuracy of ventilation duct is relatively low, which can advance the equipment speed of air duct. The definition of ventilation pipeline engineering is clearly defined as the general term of air supply, exhaust, dust removal, pneumatic transportation and smoke control and exhaust system engineering.
This article is supported by Shandong ventilation pipe processing. For more details, please click our website http://www.jnqsg.com , we will wholeheartedly provide you with satisfactory service.
上一篇：厨房排烟管道防止串味的时候怎么处理？
下一篇：消防排烟系统通风管道设计需要注意什么！
